Golden Artist Colors, Inc.
188 Bell Road
New Berlin, NY 13411-9527 USA
Toll Free: 800-959-6543
Brushes and Tools:
Step 1: Apply PROCEED Smooth Absorbent Texture through a single layer of cheesecloth. Leave cheesecloth in the finish and allow to dry or wait before removing cheesecloth, between 3 to 5 minutes. Let it set up, depending upon thickness of application. A thinner coat will leave a more defined pattern. Remove cheesecloth in smooth motion. Allow to dry.
Step 2: Blend 1:1 Slow Drying Fluid Acrylic Titanium White and Burnt Umber into the Full Bodied Glaze.
Step 3: Apply the glaze mixture to 100% of the surface.
Step 4: Brush Slow Drying Fluid Acrylic Burnt Umber into the wet glaze to create accent points. Blend or soften with cheesecloth or rag.
Step 5: Wipe excess off with damp rag and allow to dry.
Note: Visit www.proceedsystem.com for more information on PROCEED products.
Important: Golden Artist Colors provides these recipes as points of departure for exploring Golden products in faux finishing applications.
GOLDEN strongly recommends samples be created before attempting to apply these techniques to walls, some techniques will be difficult to remove or to cover at a later date.
Please contact the technical support team before application if there are concerns or questions at 1-800-959-6543.
Disclaimer for Decorative Technique Sheets
The above information is based on research and testing done by Golden Artist Colors, Inc., and is provided as a basis for understanding the potential uses of the products mentioned. Due to the numerous variables in methods, materials and conditions of producing art, Golden Artist Colors, Inc. cannot be sure the product will be right for you. Therefore, we urge product users to test each application to ensure all individual project requirements are met. While we believe the above information is accurate, WE MAKE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and we shall in no event be liable for any damages (indirect, consequential, or otherwise) that may occur as a result of a product application.