A guide to film thickness and how it relates to coverage on an ideal surface. One"s actual coverage will vary and greatly depends on how smooth or absorbent a surface is, as well as how it is prepared and primed.
When a material is applied in a thin layer it is generally referred to as a film. These films whether they are paint or plastic sheeting or paper can vary in thickness depending on how they are applied, manipulated or based on how their physical wet state properties dry. The thicknesses of these films are often measured in mil. A mil or one mil is equal to 1/1000th of an inch and should not be confused with a millimeter. Below is a list of everyday products and their thickness in mil.
Often when dealing with paint films it is important to know how thick to make materials so they perform accordingly. In determining how much material is needed for a given product knowing the coverage of the product and the square footage needed to be covered can help in determining the amount of product needed to complete the task. Brushed paint application is approximately 5 mils or 300-400 square feet per gallon and as you increase your impasto you decrease your overall coverage.
|Wet Film Thickness (mil)||Wet Film Thickness (inches)||Wet Film Thickness (metric)||Coverage (sq. ft. per gallon US)||Coverage (sq. meters per liter)|
The above information is based on research and testing done by Golden Artist Colors, Inc., and is provided as a basis for understanding the potential uses of the products mentioned. Due to the numerous variables in methods, materials and conditions of producing art, Golden Artist Colors, Inc. cannot be sure the product will be right for you. Therefore, we urge product users to test each application to ensure all individual project requirements are met. While we believe the above information is accurate, WE MAKE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and we shall in no event be liable for any damages (indirect, consequential, or otherwise) that may occur as a result of a product application.