Acrylic Modifier for Plaster is a 100% acrylic polymer emulsion designed to be added to gypsum (plaster) in the mixing stage to increase the chip-resistance of the casting. This increase in chip-resistance does not affect the high tensile strength of the gypsum.
Acrylic Modifier also increases scratch resistance, and provides an overall toughening of the cast gypsum product. Acrylic Modifier does not shorten setting time, and should not have any detrimental effects on the working time or workability of the plaster slurry.
GOLDEN Acrylic Modifier for Plaster should be added at a level of 3-20% based on the weight of the gypsum. The increase in strength is directly related to the amount of Acrylic Modifier added. A substantial increase in performance is achieved, along with best cost-efficiency, between the 5-10% range.
While Acrylic Modifier for Plaster contains water, it is not necessary to account for this additional water in the mix.
Pre-mix the water and Acrylic Modifier before adding the gypsum. This assures a homogenous mixture.
The following formulations are based on a gypsum requiring 40 parts water to 100 parts of gypsum (by weight).
|% of Acrylic Modifier
||2 quarts (4.4 lb.)
||1.75 gal. (15.4 lb.)
The above information is based on research and testing done by Golden Artist Colors, Inc., and is provided as a basis for understanding the potential uses of the products mentioned. Due to the numerous variables in methods, materials and conditions of producing art, Golden Artist Colors, Inc. cannot be sure the product will be right for you. Therefore, we urge product users to test each application to ensure all individual project requirements are met. While we believe the above information is accurate, WE MAKE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and we shall in no event be liable for any damages (indirect, consequential, or otherwise) that may occur as a result of a product application.