2004-2A Light Molding Paste: Sculptural Plaster Border

2004-2A Light Molding Paste: Sculptural Plaster Border	Golden Artist Colors, Inc. 188 Bell Road New Berlin, NY 13411-9527 USA Toll Free: 800-959-6543 Fax: 607-847-6767 lori@goldenpaints.com www.goldenpaints.com Printer Friendly Version
Paint Products: Light Molding Paste Pearl Glaze Brushes and Tools: Painter's Tape Putty Knife Basic Brush Important: Golden Artist Colors provides these recipes as points of departure for exploring Golden products in faux finishing applications. GOLDEN strongly recommends samples be created before attempting to apply these techniques to walls, some techniques will be difficult to remove or to cover at a later date. Please contact the technical support team before application if there are concerns or questions at 1-800-959-6543. Painting Instructions: Step 1. Using the Painter's Tape, tape off the width of the border needed. Step 2. Apply the Light Molding Paste using the putty knife and spread it out as even as necessary. Take the brush and create the design in the wet paste. Once the design is finished, allow the surface to dry overnight. Step 3. Apply the Pearl Glaze with a brush or roller and allow to dry.
*Disclaimer for Decorative Technique Sheets* The above information is based on research and testing done by Golden Artist Colors, Inc., and is provided as a basis for understanding the potential uses of the products mentioned. Due to the numerous variables in methods, materials and conditions of producing art, Golden Artist Colors, Inc. cannot be sure the product will be right for you. Therefore, we urge product users to test each application to ensure all individual project requirements are met. While we believe the above information is accurate, WE MAKE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and we shall in no event be liable for any damages (indirect, consequential, or otherwise) that may occur as a result of a product application.

© Golden Artist Colors, Inc.